Service for gas and steam turbines and compressors, 750 kW – 80 MW
We service centrifugal compressor trains and gas and steam turbines rated from 750 kW to 80 MW made by Siemens Energy, Dresser-Rand, Mitsubishi Heavy Industries, Howden, Kobelco and Hanwha. Our specialists have been trained at the manufacturers’ works. We work in Russia, Belarus, Kazakhstan and Uzbekistan. The aim is higher output and reliability, longer intervals between overhauls and less downtime.
Response and call-out times are agreed with the customer for each request and kept as short as possible

Key facts
- We service turbines and compressors rated 750 kW – 80 MW from seven manufacturers.
- Our engineers were trained at the manufacturers’ works and have worked on site since 1996 within the predecessor organisations.
- The full cycle: inspections, installation supervision and commissioning, maintenance, medium and major overhauls, upgrades and training.
- Combustion tuning, vibration diagnostics and field balancing, engineering studies to optimise gas turbine operation.
- Resident engineers on site and advice in abnormal situations.
- References: 8 × SGT-800 at Yamal LNG, 11 × SGT-800 in Belarus, compressors at Arctic LNG 2.
Equipment we service
| Type of equipment | Manufacturers | Service page |
|---|---|---|
| Small and medium industrial gas turbines | Siemens Energy (SGT-100, SGT-200, SGT-300, SGT-400, SGT-600, SGT-700, SGT-800) | Gas turbine service · Combustion tuning |
| Condensing and back-pressure steam turbines | Siemens Energy · Dresser-Rand · Mitsubishi Heavy Industries · Howden | Steam turbine service |
| Compressor trains: single-shaft and integrally geared, single- and multi-stage | Siemens Energy · Dresser-Rand · Mitsubishi Heavy Industries · Howden · Kobelco · Hanwha | Compressor service · Dry gas seals |
| Reciprocating compressor trains | Dresser-Rand (ESH, PHE, HSE, HHE, BDC, MOS, HOS) | Compressor service |
| Control, vibration monitoring and speed control systems | of steam turbines and compressor trains from the manufacturers we service · process control systems | Vibration diagnostics |
| Anti-surge protection and capacity control systems | on compressors from all the manufacturers listed | Anti-surge control |
Manufacturer names and designations are given to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.
By machine type

Gas turbine service and repair
We service small and medium industrial gas turbines by Siemens Energy: minor inspections, medium and major overhauls, combustion tuning, engineering studies to optimise gas turbine operation, control system upgrades and repair, spare parts. Team record: 8 SGT-800 units at Yamal LNG — supply, erection, commissioning and maintenance; 11 SGT-800 units in Belarus — installation and commissioning supervision.

Steam turbine service and repair
We service condensing and back-pressure steam turbines by Siemens Energy (SST-060 – SST-900), Dresser-Rand (RLA, RLVA, RLHA, AVTTW, 2TA, GAF, K, R, RS, TT14, TT22, EMD), Mitsubishi Heavy Industries and Howden. Maintenance and repair on request or to the scope of the operating manual; adjustment of governing and protection systems; original spare parts.

Service and repair of centrifugal and reciprocating compressors
We service single-shaft and integrally geared, single- and multi-stage centrifugal compressor trains by Siemens Energy, Dresser-Rand, Mitsubishi Heavy Industries, Howden, Kobelco and Hanwha, as well as reciprocating compressor trains: inspections, repair, seals, bearings, anti-surge protection. Team record: the Yamal LNG boil-off gas compressors and the Arctic LNG 2 feed gas and boil-off gas compressors.
Repair and manufacture of gas turbine parts with Turbinaspetsservis
A gas turbine overhaul needs both a service organisation and a plant that repairs and manufactures gas turbine parts. Our partner in this work is Turbinaspetsservis Production Enterprise LLC of Ufa.
In October 2025, at the 25th Russian Energy Forum, the two companies gave a joint presentation on an integrated approach to service during the overhaul of Siemens Energy SGT-700 gas turbines. It was based on a practical case: the overhaul of two gas turbines of unit 5 at Berezovskaya GRES of Brestenergo. After the forum the companies confirmed their intention to expand the range of Siemens Energy gas turbine parts they repair and manufacture. News item on the joint presentation at the Russian Energy Forum.
Whether specific parts can be repaired or manufactured is discussed on request: give the turbine model, the running hours and the list of parts.
Types of work
Service over the whole equipment life: scope and outcomes
Gas turbine service, steam turbine repair and compressor repair follow the same logic: each stage of a machine’s life calls for its own service. Services can be ordered separately or fixed in a long-term service contract.
| Stage | Service | Scope | Outcome |
|---|---|---|---|
| Before installation, commissioning or maintenance | diagnostic survey | assessment of the current condition of the equipment and spare parts, completeness check | a forecast of the forthcoming maintenance and a list of the parts that will be needed |
| Installation and commissioning | installation supervision and commissioning supervision | support throughout installation and commissioning, including together with the supply of new equipment | the machine is commissioned with compliance with the manufacturer’s requirements checked |
| Scheduled operation | minor inspection, medium and major overhaul | scope set by the manufacturer’s manual and the machine’s running hours, or at the customer’s request | a condition report with conclusions and recommendations, and a work plan for the next interval between overhauls |
| Deviations in operation | vibration diagnostics and field balancing, combustion tuning | vibration measurements without shutting the machine down, field balancing of the rotor; combustion tuning and studies to optimise the gas turbine’s operating mode | a conclusion on the causes of vibration and recommendations for eliminating them; more stable combustion and lower emissions |
| Abnormal situation | advice from an engineer | review of the situation from the customer’s data, with a site visit where needed | conclusions and recommendations for further operation |
| Control system without manufacturer support | control system upgrade | transfer of the protection and control logic to a new platform, for example from SPPA-T3000 or PCS7 to the Russian Ezan platform; switchover during planned outages | control of the machine no longer depends on the manufacturer’s original software |
How the work runs
- 1
Enquiry
Form, phone or email: the model, the serial number, what happened, attachments.
- 2
Diagnostic survey
Assessment of the machine and its systems on site or from the customer’s data.
- 3
Scope of work
The scope, timing, spare parts and personnel are agreed with the customer.
- 4
Execution
Work on site or in the workshop; a resident engineer where needed.
- 5
Report and recommendations
A technical report, comments on operation and a plan for the next inspections.
How to submit a service request and what to attach
Requests are accepted via the form on this page, by phone on +7 (495) 737-17-17 and by email at info@energy-management.ru. The fuller the initial data, the more precisely the engineer can prepare the scope of work and the list of spare parts. Please state:
- the manufacturer, model and serial number of the machine, from the nameplate;
- the running hours and the number of starts since commissioning and since the last inspection or overhaul: gas turbine maintenance intervals are counted by both;
- what is required: an inspection, repair, installation supervision, diagnostics or advice;
- for a fault, what happened, the event and protection trip logs, and vibration and temperature trends;
- reports on previous inspections and overhauls;
- the site address, personnel access requirements and the preferred window for the work.
For spare parts for steam turbines and compressors, give the catalogue numbers: we use them to select the parts and confirm their origin.
Long-term service contract
The contract fixes the scope and frequency of work for several years and removes the need to arrange every visit separately.
- minor inspections, medium and major overhauls
- combustion tuning, vibration diagnostics and field balancing, engineering studies to optimise gas turbine operation
- upgrades and repair of equipment and control systems
- resident engineers on site
- spare parts and consumables
- diagnostic surveys
- maintenance and repair on request or to the scope of the operating manual
- advice in abnormal situations
- installation supervision and commissioning supervision
- personnel training
Projects
All projects
Akkuyu NPP: high-voltage testing of 400 kV GIS and SF6 bus ducts
400 kV GIS · 400 kV SF6 bus ducts

Arctic LNG 2: installation and commissioning of feed gas and boil-off gas compressors
feed gas compressors · boil-off gas compressors

Belenergo: installation and commissioning supervision of 11 SGT-800 gas turbine units
11 × SGT-800 · full load in 15 minutes

Ilim: board machine control system in Ust-Ilimsk
board machine of 600,000 tonnes a year · 2023

Knauf Petroboard: CHP steam boiler automation
steam boiler control system on SIMATIC PCS7

Rosseti: GIS for the 220 kV TsRP substation in Krasnoyarsk
1,920 sets of GIS equipment

USC: electrical equipment for three fishing vessels
3 vessels · power distribution and monitoring system based on PMA300 · 2020–2023

Yamal LNG: eight SGT-800 gas turbines, boil-off gas compressors and 29 modular substations
8 × SGT-800 · 4 boil-off gas compressors · 29 modular substations
Engineers’ experience: examples of work
Examples of work from customers’ letters of appreciation and company news:
- Centrifugal compressors. In July 2023 the company carried out a scheduled Level 1 inspection of two Siemens STC-SV turbocompressors as part of a planned repair programme at the condensate treatment plant of Gazprom Pererabotka LLC. The letter from GSP Remont LLC No. 15520 of 6 October 2023 notes the high qualifications of our staff. News item on the Siemens compressor inspection.
- Gas turbine control systems. Maintenance of the gas turbine control system at Kirov CHP-3 (T Plus) under a contract of 10 April 2023. According to the customer’s letter No. 50300-27-00079 of 20 March 2025, the work performed, together with the conclusions and recommendations given in consultations and service reports, made it possible to achieve highly efficient and failure-free operation of the gas turbine control system. News item on the Kirov CHP-3 letter.
- Preparing a steam turbine control system. Testing of a digital model of a 2.4 MW Howden steam turbine has been completed to prepare the automatic control system for commissioning.
Letters of appreciation
Spare parts
Original parts and consumables for SST, RLA, RLVA and RLHA turbines and STC and Datum compressors. We confirm the origin by catalogue numbers and documents.
Engineers of the service line
Gas turbine serviceQuestions and answers
What should you do if a turbine or compressor trips?
Send an urgent request with the “Equipment is down” box ticked or call +7 (495) 737-17-17. An engineer will ask for the nameplate data, the event logs and the running hours, give first recommendations and agree the site visit. Response and call-out times are agreed with the customer for each request and kept as short as possible.
Do you carry out vibration diagnostics on a running machine?
Yes: measurements at operating conditions, spectrum analysis, field balancing of the <a class="term-link" href="../glossary/rotor/index.html" title="What is the rotor of a turbine or compressor">rotor</a> and recommendations for removing the causes of vibration.
Do you train the customer’s personnel?
Yes, to a programme agreed with the customer: operation, maintenance and safe working methods; on site or in a training room.
Is there a warranty on the work and the spare parts?
The warranty on the work performed and the <a class="term-link" href="../glossary/spare-parts/index.html" title="What spare parts are and how their origin is confirmed">spare parts</a> supplied is provided by Energy Management LLC; the terms are set out in the contract. Warranty cases are handled by our own specialists.
Can I order a single job without a long-term contract?
Yes. An inspection, repair, installation supervision, vibration diagnostics or advice from an engineer can be ordered as a one-off job with a separate request. The scope of maintenance and repair is set at the customer’s request or by the machine’s operating manual. A long-term contract makes sense when work recurs: inspections and overhauls are planned in advance for its whole term.

