Service by manufacturer

Service for Kobelco compressors

Maintenance and repair of Kobelco compressor trains: inspections, diagnostics, anti-surge protection and capacity control systems, spare parts. An independent service company; our engineers were trained at the manufacturers’ works. We work in Russia, Belarus, Kazakhstan and Uzbekistan.

Equipment we service
  • compressor trains

State the model and the serial number of the train in your request.

The manufacturer’s names and designations are given to identify the equipment we service. The trademarks belong to their owner.

Key facts

  • Inspections of compressor trains by running hours and on request.
  • Diagnostics: vibration, condition of seals and bearings, stage performance.
  • Anti-surge protection and capacity control systems: adjustment and upgrades.
  • Spare parts against an enquiry with the model and the serial number.

Equipment and types of work

Types of work by Kobelco equipment: ✓ — we carry it out
EquipmentInspectionsDiagnosticsAnti-surge protection and controlSpare parts
Compressor trains✓✓✓✓

Which Kobelco compressors we service

We service Kobelco centrifugal compressor trains — single-shaft and integrally geared, single-stage and multi-stage. Our rotating equipment service covers machines with a rated output from 750 kW to 80 MW. For Kobelco screw and reciprocating machines, send us the model and serial number and we will tell you what work we can carry out.

Kobelco is a brand of the Kobe Steel group of Japan. Kobelco process compressors are made by Kobe Steel’s machinery business; many of their components are produced at the Takasago Works in Hyogo Prefecture, which also has a test facility for large compressors. The manufacturer builds all three main types of machine — centrifugal, screw and reciprocating compressors — and reports more than 10,000 units delivered worldwide.

Kobelco compressors: manufacturer’s data and our service
TypeDesigns (manufacturer’s data)Typical applicationsOur service
Single-shaft centrifugalfor long-term continuous operation at high temperatures, pressures and flow rates; the back-pull design makes maintenance easiercycle gas in polyethylene and polypropylene production, recycle gas in ethylene oxide and ethylene glycol production, heat pump compressors in propane dehydrogenation unitswe service them
Integrally geared centrifugalup to 4 shafts and 8 stages; compress air, nitrogen, steam and toxic gases such as carbon monoxide and chlorineplant and instrument air, air and gas separation, nitrogen for ammonia plants, petrochemicalswe service them
Screwoil-free: up to 45 bar(g) and 143,000 m³/h at suction; oil-injected: up to 100 bar(g), slide-valve capacity control from 15 to 100%vapour recovery, petrochemicals, hydrogen processes, fuel gas for gas turbines and LNG carriers, boil-off gas at LNG terminalson request
Reciprocatinghorizontal KR series to API 618 and vertical designs; more than 60 machines for ultra-low temperatures, including LNG boil-off gasrefineries, petrochemicals, power plants, LNG terminals, fuel gas for ship engineson request

What compressor train service includes

The scope of work depends on the running hours, the condition of the machine and the requirements of the operating manual. Maintenance and repairs are carried out at the customer’s request or to the scope of the manual, with checks against the equipment manufacturer’s requirements.

  • Diagnostic survey. Assesses the current condition of the train and its spare parts and helps forecast upcoming maintenance and the components it will need. It is also carried out before installation, commissioning or maintenance.
  • Inspections and repairs. Minor inspections, medium and major overhauls, vibration diagnostics and field balancing.
  • Train systems. Service of the control, vibration monitoring and overspeed protection systems and of anti-surge protection and capacity control; upgrades and repairs of control systems.
  • New equipment. Installation supervision and supervision of commissioning, covering the full cycle of installation and start-up.
  • Operational support. Advice in abnormal situations and before upgrades, resident engineers at the customer’s site, and personnel training in efficient and safe operation and routine maintenance.

Spare parts for this manufacturer

Spare parts and consumables for Kobelco compressors are handled on request: from the model, serial number and part catalogue numbers we will tell you whether we can supply them.

Control system

What to include in a Kobelco compressor service request

The more complete the initial data, the more accurate the work programme, the crew make-up and the spare parts list. Besides the model and serial number from the train’s nameplate, the following will help:

  • the process gas and its composition, suction and discharge pressure, flow rate, the type of driver and whether there is a gearbox;
  • running hours since commissioning and since the last inspection or overhaul, and what was done then;
  • the type of shaft seals — dry gas, oil or labyrinth — and the type of bearings;
  • trends in vibration, bearing temperatures and rotor axial position, and records of anti-surge protection actions;
  • the train’s control system: manufacturer and software version;
  • the task — a scheduled inspection, repair, failure investigation or upgrade — and the possible shutdown window.

Energy Management LLC is an independent service company: we do not represent Kobe Steel or act on its behalf. The work programme is based on the customer’s documentation and the survey results, so please list what is available on site: the operating manual, drawings with clearances, records of previous repairs. We recommend the parts and consumables specified by the manufacturer.

Monitoring between inspections: what to track daily

Between planned inspections the condition of a Kobelco compressor is best seen in a few trends in the control system: bearing vibration and temperature, differential pressure across the suction and lube oil filters, oil pressure and temperature, anti-surge valve position and margin to the surge line, gas temperature by stage. A slow drift in any of them is a reason to ask for advice before a protection trips.

We recommend that the customer’s staff keep a short daily checklist of these parameters and record all events: starts, shutdowns, changes of operating mode, alarms. Such a log saves time during an inspection and makes it possible to attribute a deviation precisely to its cause — a change in gas composition, the operation of adjacent equipment or wear of a component.

Preparing for a planned outage

A few weeks before the outage we agree the scope of work, the list of spare parts and consumables, the lifting equipment and permits required. The customer prepares the site, isolates and drains the machine and provides access to the control system; our crew brings the tooling and fixtures. After reassembly — a trial start, checks of protections and anti-surge control, an acceptance record with actual parameters.

Questions and answers

What is anti-surge protection and why does it need adjustment?

<a class="term-link" href="../glossary/compressor-surge/index.html" title="What is compressor surge">Surge</a> is flow breakdown in a compressor when the flow drops below the permissible limit; it destroys seals and bearings. The protection system opens the bypass before the surge line, and capacity control keeps the operating point with a margin. The settings are checked against the actual characteristic of the machine.

Do you service Kobelco screw and reciprocating compressors?

It depends on the specific machine. Of Kobelco equipment, we service centrifugal compressor trains: single-shaft and integrally geared, single-stage and multi-stage. Reciprocating compressor trains are also part of our service, and we consider Kobelco screw and reciprocating compressors on request: send us the model, serial number and a description of the task, and we will tell you what work we can carry out.

Is the manufacturer’s documentation needed to repair a Kobelco compressor?

It is advisable. Maintenance and repairs are carried out at the customer’s request or to the scope of the operating manual, with checks against the manufacturer’s requirements. So before the work we ask for the manual, drawings with assembly clearances, records of previous repairs and details of replaced parts. If some documents are missing, we discuss this while preparing the programme: the diagnostic survey shows what can be assessed by measurements on the machine.

Other manufacturers

Manufacturer names and designations are given to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.

CallSend a request
Service requestRequest a quotationData sheet