What is an integrally geared compressor

An integrally geared compressor is a centrifugal compressor with a built-in gearbox: several high-speed pinion shafts with overhung impellers are arranged around a central bull gear, and each stage runs at its own optimum speed. Intercooling between stages reduces the work of compression; pressure ratio up to 35, discharge pressure up to 10 MPa, flow up to 160,000 m³/h.

Key facts

  • A bull gear drives 2–4 high-speed pinion shafts with impellers.
  • Each stage runs at its own optimum speed.
  • Intercooling reduces the work of compression.
  • Pressure ratio up to 35, up to 10 MPa and 160,000 m³/h.
  • Built to API 617 or API 672.

How it is built

A motor or turbine drives the central bull gear; from it two to four pinion shafts with impellers at their ends are driven. The first stages run at lower speed with larger impellers, the last at higher speed with smaller ones; between stages the gas passes through intercoolers. Adjustable inlet guide vanes control output without throttling losses.

Ratings and standards

Discharge pressure up to 10 MPa, flow up to 160,000 m³/h, drive power up to 30 MW, pressure ratio up to 35 in one machine. Gases: air, nitrogen, CO2, ammonia, steam. Built to API 617 (process gases) or API 672 (general-purpose air, packaged integrally geared compressors).

Where it is used

Air separation and industrial gases, compressed air for metallurgy and chemicals, CO2 compressors for urea production and carbon capture, steam compressors for mechanical vapour recompression, nitrogen compressors.

How it differs from a single-shaft machine

A single-shaft compressor with impellers on a common shaft has a more compact gas path and is more robust at high pressures and with aggressive gases; the integrally geared machine is more efficient thanks to the optimum speed of each stage and intercooling, is easier to control and cheaper at high pressure ratios for clean gases.

Maintenance

Overhaul of the gearbox and bearings, replacement of pinion seals, cleaning of intercoolers, impeller balancing, tuning of inlet guide vanes and stage-by-stage anti-surge protection; spare parts by model and serial number.

Questions and answers

Why is an integrally geared compressor more efficient than a single-shaft one?

Each stage runs at its own optimum speed and the gas is cooled after every stage, so the work of compression is lower. In a single-shaft machine all impellers turn at the same speed and some stages run away from their optimum. On the other hand the single-shaft machine is more robust at high pressures and with aggressive gases.

When is API 672 used and when API 617?

API 672 covers packaged integrally geared air compressors for general service. API 617 covers process gases and critical applications: nitrogen, CO2, ammonia, hydrocarbons. The chosen standard is fixed in the data sheet — see the glossary entry on API standards.

Where are integrally geared compressors used?

In air separation and industrial gas production, for compressed air at metallurgical and chemical plants, in urea production (CO2 compressors), for mechanical vapour recompression and at nitrogen stations. Industry solutions are on the metals and mining page.

Related terms

Updated: 2026-09-23

CallSend a request