What are the API 617, 618, 619, 672, 673, 611 and 612 standards
API standards are the American Petroleum Institute’s requirements for the design, manufacture and testing of equipment for the oil, chemical and gas industries. API 617 covers centrifugal and axial compressors, 618 reciprocating, 619 rotary screw, 672 packaged integrally geared air compressors, 673 centrifugal fans, and 611 and 612 general- and special-purpose steam turbines.
Key facts
- API is the American Petroleum Institute; its standards serve oil, gas and chemicals.
- Compressors: API 617, 618, 619 and 672; fans: API 673.
- Steam turbines: API 611 and API 612.
- Auxiliaries: API 614 for oil systems, API 670 for vibration monitoring.
- The customer marks the standard’s options in the data sheet.
What they regulate
Safety margins and allowable stresses, materials, rotor critical speeds and vibration, seal clearances, bearings, lube oil systems, instrumentation and protection, the scope of factory tests — mechanical and performance — and the documentation package. A standard sets the minimum level; the customer supplements it in the data sheet, where the selected options are marked.
Standards for compressors
API 617 — centrifugal and axial compressors, including integrally geared machines for process gases; API 618 — reciprocating compressors up to 50 MPa with pulsation and vibration requirements; API 619 — rotary positive-displacement, that is screw compressors; API 672 — packaged integrally geared air compressors for general service; API 673 — centrifugal fans and blowers. In addition, API 614 covers lube oil and seal systems and API 670 vibration monitoring systems.
Standards for steam turbines
API 611 — general-purpose turbines: spared drives of pumps and fans, simple design; API 612 — special-purpose turbines without a spare in critical processes, with stricter requirements for the rotor, governing and testing. NEMA SM23 adds requirements for allowable nozzle loads and connections.
Why it matters to the customer
A reference to API in the data sheet and specification makes the requirements unambiguous for all bidders, simplifies comparison of proposals and acceptance: tests and documentation follow common rules. On this site the standards are given for every type of compressor and turbine.
Questions and answers
Are API standards mandatory in Russia?
No, they are voluntary industry standards. But oil, gas and chemical customers often require them in specifications because they set common rules for design, testing and documentation. The equipment must also meet mandatory requirements — the EAEU technical regulations and industrial safety rules.
What is an API data sheet?
A form attached to the standard in which the customer states gas and operating parameters, requirements for materials, driver, auxiliary systems and tests, and marks the chosen options. A completed data sheet is the basis for a technical and commercial proposal and for comparing suppliers.
Which tests does API require?
Mechanical running tests on the test stand — vibration, bearings and operation at rated speed; on request, performance tests and full-train tests with the driver. The customer chooses the test scope in the data sheet, and the results go into the documentation package.
Related terms
Updated: 2026-09-23