What is a reciprocating compressor
A reciprocating compressor is a positive-displacement machine in which gas is compressed by a piston in a cylinder and discharged through valves. It gives the highest pressure among industrial compressors — up to 50 MPa — at moderate flows up to 115,000 m³/h and drive power up to 10 MW; 2 to 10 cylinders with intercooling. Built to API 618 for the oil, chemical and gas industries.
Key facts
- Gas is compressed by a piston in a cylinder and discharged through valves.
- Discharge pressure up to 50 MPa, flow up to 115,000 m³/h.
- 2 to 10 cylinders with intercooling.
- The main type for hydrogen at pressures up to 50 MPa.
- Built to API 618.
How it is built
A frame with crankshaft and crossheads, double-acting cylinders with suction and discharge valves, piston rings and rod packings, cylinder lubrication (or an oil-free design with polymer rings), pulsation dampers, intercoolers and separators between stages. The driver is an electric motor through a coupling or belt, less often a gas engine.
Ratings and gases
Discharge pressure up to 50 MPa, flow up to 115,000 m³/h, drive power up to 10 MW, 2 to 10 cylinders; compression stages with intercooling. Gases: natural gas, CO2, hydrogen, air, nitrogen. For hydrogen, reciprocating machines are the main type at pressures up to 50 MPa: filling stations, hydrotreating, storage.
Where it is used
Refining (hydrogen compressors of hydroprocessing units), gas injection into reservoirs and underground storage, gas filling stations, chemicals and fertiliser production, nitrogen stations. Chosen where high pressure is needed at moderate flow and for light gases that centrifugal machines compress inefficiently.
Capacity control
Stepwise — by suction valve unloaders and clearance pockets; stepless — by variable speed or a hydraulic valve regulator; recycle to suction at low loads. Pulsations, valve temperatures, vibration and packing leakage are monitored.
Maintenance
Regular replacement of valves, piston rings and packings, clearance and wear checks, overhaul of crossheads and bearings; supply as a package — compressor, driver, baseplate, coolers, separators, control system. Service and spare parts for reciprocating compressors by the company’s own engineers.
Questions and answers
When is a reciprocating compressor chosen over a centrifugal one?
When high pressure is needed at moderate flow and when the gas is light, for example hydrogen, which would need many stages in a centrifugal machine. A reciprocating compressor holds its pressure when gas composition changes and is easy to control in capacity, but needs more maintenance.
What wears in a reciprocating compressor?
Above all the valves, piston rings and rod packings, which are replaced to schedule. Clearances and wear of crossheads, bearings and cylinders are also checked. Valve temperatures and pressure pulsations help to find a faulty valve before it fails.
Which reciprocating compressors does Energy Management supply?
API 618 compressors with discharge pressures up to 50 MPa, flows up to 115,000 m³/h and drive power up to 10 MW, with 2 to 10 cylinders, packaged with driver, baseplate, coolers, separators and control system. See API 618 reciprocating compressors.
Related terms
Updated: 2026-09-23