What is a screw compressor
A screw compressor is a rotary positive-displacement machine: two helical rotors with meshing profiles carry the gas along the axis, reducing the volume of the cavities and raising the pressure without valves or reciprocating parts. Oil-free (dry) and oil-injected designs; discharge pressure up to 1.3 MPa with atmospheric suction, flow up to 1,070 m³/min, power up to 1.8 MW. Built to API 619.
Key facts
- Two screw rotors compress gas without valves or pistons.
- Versions: oil-free (dry) and oil-injected.
- Up to 1.3 MPa with atmospheric suction, flow up to 1,070 m³/min.
- Drive power up to 1.8 MW.
- Not subject to surge; built to API 619.
How it is built
Male and female rotors in a casing with suction and discharge ports; in oil-free machines the rotors are synchronised by timing gears and do not touch, in oil-injected machines the oil seals the clearances, cools the gas and lubricates the bearings and is then removed in a separator. Capacity is controlled by a slide valve, recycle or variable speed. Packaged design: compressor, driver, coolers and control system on one baseplate.
Ratings and gases
Discharge pressure up to 1.3 MPa with atmospheric suction, flow up to 1,070 m³/min, drive power up to 1.8 MW. Gases: hydrocarbons, air, industrial gases; oil-injected machines for clean applications, oil-free where oil in the gas is not acceptable. Standard API 619 — rotary positive-displacement compressors for the oil, chemical and gas industries.
Where it is used
Compressed air stations, associated and flare gas recovery, fuel gas for gas turbines, refrigeration plants, pneumatic conveying, vacuum systems. It copes well with variable loads and dirty gas and tolerates frequent starts.
How it differs from other types
Compared with a reciprocating machine — no valves or pulsations, less vibration and maintenance, but a lower pressure limit. Compared with a centrifugal machine — it keeps its capacity as pressure changes and is not subject to surge, but is inferior in flow and efficiency at large powers.
Questions and answers
How does an oil-free screw compressor differ from an oil-injected one?
In an oil-free machine the rotors are synchronised by timing gears and do not touch, and the gas never contacts oil — needed where oil in the gas is not acceptable. In an oil-injected machine the oil seals the clearances, cools the gas and lubricates the bearings, so the machine is simpler and compresses more per stage, but the oil must then be removed in a separator.
Why does a screw compressor suit associated gas?
It tolerates dirty gas and variable composition, copes with frequent starts and keeps its capacity as pressure changes. That is why screw machines are used for associated and flare gas recovery and for fuel gas conditioning for gas turbines.
Which screw compressors does the company supply?
API 619 machines with discharge pressures up to 1.3 MPa at atmospheric suction, flows up to 1,070 m³/min and drive power up to 1.8 MW, packaged on one baseplate. See API 619 screw compressors.
Related terms
Updated: 2026-09-23