Dresser-Rand spare parts: Datum compressors and steam turbines
We supply original spare parts and consumables for Dresser-Rand centrifugal and reciprocating compressors and for RLA, RLVA, RLHA, AVTTW, 2TA, GAF, K, R, RS, TT14, TT22, EMD steam turbines. Parts are selected by machine model and serial number; origin is confirmed by catalogue numbers, markings and accompanying documents, and every batch is inspected by our engineers before shipment.

What we supply
- filter elements
- instrumentation: sensors, proximity probes
- trip valves and their spare parts
- turning gear
- oil system equipment and parts
- complete bearings and bearing shells
- seals of all types
- casing fasteners
- governing and steam admission unit parts
- flow path components: rotors, diaphragm carriers, seal rings, blades, nozzle blocks
- couplings
- control and vibration monitoring system spares
Models
| Machine type | Models | Service |
|---|---|---|
| Steam turbines | RLA, RLVA, RLHA, AVTTW, 2TA, GAF, K, R, RS, TT14, TT22, EMD | Steam turbine service |
| Compressor trains: centrifugal and reciprocating | Datum, Datum R, Datum C, Datum A, Datum I (ICS), Datum P, ESH, PHE, HSE, HHE-FB, HHE-VB, HHE-VG, HHE-VL, BDC-12H, BDC-18H3, MOS, HOS, HOSS, M/B-line | Compressor service |
Manufacturer names and designations are given to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.
How to order
- 1
Enquiry data sheet
Model, serial number, part catalogue numbers or names, quantity; nameplate photo and specification.
- 2
Selection
Our engineer checks the items against the machine documentation and clarifies substitutions.
- 3
Proposal
A technical and commercial proposal with catalogue numbers.
- 4
Incoming inspection and delivery
Inspection of the batch by the company's engineers, accompanying documents, shipment.
Why customers choose us
- 1
End-to-end approach
From diagnostics and the repair plan through to handover into operation.
- 2
Qualified engineers
Extensive experience with Siemens Energy and Dresser-Rand compressors and steam turbines.
- 3
Original parts
Origin confirmed by catalogue numbers, markings and accompanying documents; every batch is inspected by our engineers before shipment.
- 4
Energy Management LLC warranty
The warranty on supplied spare parts is provided by Energy Management LLC; warranty cases are handled by our own specialists.
Causes of failure and recommendations
Why turbines and compressors fail
- operation outside the rules
- unsuitable components
- excessive vibration
- foundation defects or the influence of adjacent equipment
- late replacement of wearing parts
- end of service life
How to extend service life
- regular diagnostics and maintenance
- consumables and parts specified by the manufacturer
- qualified specialists
Dresser-Rand and Siemens Energy: what it means for spare parts
Since 2015 Dresser-Rand has been part of Siemens and later Siemens Energy, so the same machine may be documented under two brands: data book and drawings — Dresser-Rand, later parts list revisions and bulletins — Siemens Energy. The models kept their designations (Datum, HHE, RLA, 2TA and others), and catalogue numbers appear in both formats. For parts selection this is not a problem: the engineer works with the documentation in whatever form the customer holds it and checks the items against the current numbers.
What matters more is that part of the Dresser-Rand fleet has been in service for decades, and for older executions items may have been replaced by the manufacturer’s upgraded equivalents. We state such replacements explicitly in the proposal — the number that was in the parts list and the number supplied now — so that the customer sees exactly what changes.
RLA, RLVA, RLHA steam turbines and larger machines: typical items
The small RLA, RLVA and RLHA steam turbines are mechanical drive machines with a radially split casing; on the RLVA the shaft is vertical. Their end seals are removable, with carbon rings, and the bearings are lubricated by oil rings. Hence the typical spare parts list: carbon seal rings, bearings and oil rings, governor and valve parts, nozzle components, split line gaskets. These items are replaced by running hours and make sense in the emergency stock — the turbine often drives a pump or fan without which the plant stands still.
For the larger turbines — AVTTW, 2TA, GAF, K, R, RS, TT14, TT22, EMD — the bulk of the scope consists of flow path and steam admission parts: blades, diaphragms, sealing rings, stop and control valves with seats and stems, governing system components, bearings. They are ordered based on inspection results with clearance measurements; the lead time of large items is built into the repair plan in advance.
Datum compressors and reciprocating machines
For Datum centrifugal compressors (Datum, R, C, A, I/ICS, P) the key groups are dry gas seals as cartridges for the serial number, journal and thrust bearings, seal gas panel and lube oil system parts, spares for the control and vibration monitoring systems. Impellers, diffusers and flow path labyrinths are ordered based on inspection results.
Reciprocating compressors — ESH, PHE, HSE, HHE (FB, VB, VG, VL), BDC-12H, BDC-18H3, MOS, HOS, HOSS, M/B-line — call for a different approach: they have many consumable parts with short replacement intervals. These are suction and discharge valves and their plates, piston and rider rings, piston rod packing, crosshead and connecting rod bearings, cylinder lubrication system parts. For such machines the annual supply plan is based on the number of starts and the running hours of each cylinder, and the emergency stock includes valve and ring sets for every frame size.
How we confirm replacements for discontinued items
If an item from the parts list is no longer produced, the proposal states the manufacturer’s replacement item with its catalogue number and the basis for the replacement — a bulletin or the current parts list. We do not offer “equivalents” of our own: our rule is parts and consumables specified by the manufacturer. The origin of every item supplied is confirmed by catalogue numbers, markings and accompanying documents; the batch undergoes incoming inspection by our engineers before dispatch.
The warranty for the spare parts supplied is given by Energy Management LLC; warranty cases are investigated and resolved by our specialists. For machines whose parts list has not survived, the list of items is reconstructed from the documentation and measurements during an inspection — a separate piece of work worth building into the repair plan.
How to prepare a Dresser-Rand spare parts request
For Dresser-Rand machines a complete request saves the most time: the fleet is diverse, and documentation often exists under two brands.
- model and serial number from the nameplate (photo) — for Datum compressors also the casing designation and number of stages, for reciprocating machines the number and designations of cylinders;
- catalogue numbers or item names with a reference to the parts list and its revision; if there is no parts list — a drawing or a photo of the part with dimensions;
- quantity, urgency and the required delivery date; for a planned overhaul — the outage date;
- what has already been replaced on this machine and when — so that we do not offer a part that will not fit after a previous upgrade.
The easiest way is to fill in the enquiry data sheet: it has all the fields, and photos and the parts list can be attached. In reply — a technical and commercial proposal with catalogue numbers and replacements stated.
Projects and related pages
Questions and answers
What data is needed to select a part?
The machine model and serial number, the part catalogue number or name and the quantity. A nameplate photo and specification help — attach them to the enquiry data sheet.
How do you confirm the origin of parts?
By catalogue numbers, markings and accompanying documents. Every batch is inspected by our engineers before shipment: incoming inspection and a check against the machine documentation.
Who provides the warranty on spare parts?
Energy Management LLC. Warranty cases are handled by our own specialists; the terms are set by the supply contract.
Do you supply parts for machines no longer in production?
Yes: we select by model and serial number, where necessary from drawings and samples.
Engineering team
Rotating equipment service