Service

Equipment service by manufacturer

We service gas and steam turbines, compressors and control systems built by Siemens Energy, Dresser-Rand, Mitsubishi Heavy Industries, Howden, Kobelco and Hanwha, rated 750 kW – 80 MW. Our engineers have been trained at the manufacturers' works; we operate in Russia, Belarus, Kazakhstan and Uzbekistan.

Manufacturers7Output750 kW – 80MWModels in the catalogue58

Manufacturers

Dresser-Rand

Independent service for Dresser-Rand Datum compressors (Datum, R, C, A, I/ICS, P), ESH, PHE, HSE, HHE (FB, VB, VG, VL), BDC-12H, BDC-18H3, MOS, HOS, HOSS, M/B-line and RLA, RLVA, RLHA, AVTTW, 2TA, GAF, K, R, RS, TT14, TT22, EMD steam turbines: maintenance, repairs, original spare parts and assemblies. The company specialises in Siemens Energy and Dresser-Rand equipment; our engineers were trained at the manufacturers’ works.

Datum compressors and steam turbines

Read more

Hanwha

Maintenance and repair of Hanwha compressor trains: inspections, diagnostics, control system adjustment, spare parts supply. An independent service company; our engineers were trained at the manufacturers’ works. We work in Russia, Belarus, Kazakhstan and Uzbekistan.

Compressors

Read more

Howden

Maintenance of Howden steam turbines and compressor trains: inspections and repairs. The team’s record includes completed testing of the digital model of a 2.4 MW Howden steam turbine to prepare the control system for commissioning. An independent service company; we work in Russia, Belarus, Kazakhstan and Uzbekistan.

Steam turbines and compressors

Read more

Kobelco

Maintenance and repair of Kobelco compressor trains: inspections, diagnostics, anti-surge protection and capacity control systems, spare parts. An independent service company; our engineers were trained at the manufacturers’ works. We work in Russia, Belarus, Kazakhstan and Uzbekistan.

Compressors

Read more

Mitsubishi Heavy Industries

Maintenance of Mitsubishi Heavy Industries condensing and back-pressure steam turbines and compressor trains: inspections, repairs, control system adjustment. An independent service company; our engineers were trained at the manufacturers’ works. We work in Russia, Belarus, Kazakhstan and Uzbekistan.

Steam turbines and compressors

Read more
Siemens Energy

Siemens Energy

An independent service company whose engineers were trained at the manufacturers’ works: inspections, repairs, commissioning, combustion tuning and control system upgrades for SGT-100, SGT-200, SGT-300, SGT-400, SGT-600, SGT-700 and SGT-800 gas turbines. The team’s record includes 8 SGT-800 units at Yamal LNG and 11 in Belarus. We work in Russia, Belarus, Kazakhstan and Uzbekistan.

SGT gas turbines

Read more

Siemens Energy

An independent service company: maintenance, medium and major overhauls of Siemens Energy SST-060 – SST-900 steam turbines and STC compressors, original spare parts and control system upgrades. The company specialises in Siemens Energy and Dresser-Rand equipment; our engineers were trained at the manufacturers’ works. We work in Russia, Belarus, Kazakhstan and Uzbekistan.

SST steam turbines and STC compressors

Read more

Manufacturers' names and designations are used to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.

What service for different manufacturers’ machines has in common

The same working rules apply to machines from every manufacturer listed here: they cover documentation, spare parts and software. Choose the page by the manufacturer and machine type shown on the nameplate; Siemens Energy has two pages, one for SGT gas turbines and one for SST steam turbines and STC compressors.

  • Documentation. Maintenance and repairs are carried out within the scope of the operating manual or at the customer’s request; the condition of the machine and its spare parts is assessed by a diagnostic survey.
  • Spare parts. We recommend the parts and consumables specified by the manufacturer. We confirm the origin of supplied parts by catalogue numbers, markings and accompanying documents; the list of models is in the spare parts catalogue.
  • Software. Where neither the original software nor direct support from the manufacturer is available, the control system is tested on a digital model of the machine before work on site. For example, testing of the digital model of a 2.4 MW Howden steam turbine was completed to prepare the control system for commissioning.

Choosing the page: by the machine nameplate

Take the manufacturer and model from the nameplate on the machine casing or from the data book — not from the project name or the EPC contractor’s brand. The nameplate shows the maker, model designation, serial number and year of manufacture; the same data are needed for a service request and for spare parts selection. If the nameplate is lost, the model is identified from the data book, the control system documentation and characteristic design features — our engineers do this during a survey.

Brands have changed, and this causes confusion. Dresser-Rand compressors and steam turbines were built and documented under the Siemens Energy brand after 2015 — they have their own Dresser-Rand page, and spare parts are selected by both part number formats. KK&K, Peter Brotherhood and CKD steam turbines and compressors belong to Howden, part of Chart since 2023. Rolls-Royce aeroderivative turbines are also found under later brands — go by the model shown on the nameplate.

Work common to all manufacturers

The manufacturer pages describe the specifics of particular machines; the types of work are the same.

How to prepare a service request

The more precise the request, the faster and more accurate the proposal. Please state:

  • manufacturer, model and serial number of each machine (a photo of the nameplate is best);
  • running hours since start-up and since the last inspection, dates and scope of previous repairs;
  • what is of concern: parameter deviations, vibration, protection trips, leaks — with trends or log extracts if available;
  • the control system: platform, version, whether manufacturer support and source projects exist;
  • what documentation the customer holds: manuals, drawings, spare parts lists;
  • timing: when a shutdown is possible and for how long, whether there is a window in the maintenance schedule;
  • site conditions: permits, lifting equipment, accommodation for the crew.

In reply we prepare a technical and commercial proposal: scope of work by stage, crew composition, spare parts and tooling required, acceptance procedure. For complex cases we first propose a diagnostic survey — so that the scope of repair is defined by the actual condition rather than by assumptions.

When the machine has no manufacturer support

A significant share of the fleet in Russia and neighbouring countries runs without direct support from the original manufacturer: no access to software updates, original documentation or the spare parts catalogue. This does not make the machine unserviceable — the way of working changes. The condition of components is established by a diagnostic survey, the scope of repair by its results; part replacements are agreed with the customer, and the origin of every item is confirmed by catalogue numbers, markings and accompanying documents.

For control systems without manufacturer support we prepare the site work on a digital model of the machine: protection logic, controllers and start-up sequences are verified before the visit, and on site only confirmation on real signals remains. This is how the control system of a 2.4 MW Howden steam turbine was prepared in 2024. If the platform needs replacing, the algorithms are migrated to a supported domestic or foreign system while preserving logic proven over years of operation.

Documentation and software: what to keep

The older the machine, the more valuable every page of its documentation. We recommend that customers keep and regularly check:

  • the data book and operating manual with the serial number, general arrangement and cross-section drawings, the spare parts list with its revisions;
  • reports of all inspections and repairs with clearance and run-out measurements — they show the wear trend;
  • backups of the control and vibration monitoring system projects, controller parameters and protection settings — preferably in two places and dated;
  • certificates and data sheets of installed spare parts, running hours and event logs.

If any of this is missing, say so in the request: part of the documentation can be reconstructed from measurements and control system data, part from the manufacturer’s archives, and this is sensibly done during a planned outage rather than an emergency one.

How a long-term service contract is built

For a fleet of several machines from different manufacturers one contract is more convenient than a series of one-off orders. It fixes the list of machines, the inspection intervals by running hours, the procedure for unplanned visits, the annual spare parts supply plan, the reporting format and the communication procedure. Control system work, staff training and a resident engineer are included as needed.

The scope of the first year is defined by a fleet survey: for each machine — condition, history, documentation, control system. Thereafter the plan is adjusted to the actual inspection results. Such a contract is not tied to one manufacturer: the company’s engineers service machines of all the listed brands, and the customer works with one team and one schedule.

Related

Questions and answers

Are you an authorised service partner of the manufacturers?

Energy Management LLC is an independent service company. Our engineers have been trained at the manufacturers' works and service the equipment of the manufacturers listed here; the names are used to identify the equipment we service.

What if my manufacturer is not on the list?

Send us an enquiry with the model and serial number and we will confirm whether we can service it.

Do you supply spare parts for all the manufacturers listed?

Our spare parts catalogue covers only Siemens Energy and Dresser-Rand steam turbines and compressor trains: for them we select and supply consumables, spare parts and assemblies. For SGT gas turbines and machines from the other manufacturers listed, send us the model and serial number of the machine and the catalogue numbers or names of the parts, and we will tell you whether we can supply them.

CallSend a request
Service requestRequest a quotationData sheet