Service for Howden steam turbines and compressors
Maintenance of Howden steam turbines and compressor trains: inspections and repairs. The team’s record includes completed testing of the digital model of a 2.4 MW Howden steam turbine to prepare the control system for commissioning. An independent service company; we work in Russia, Belarus, Kazakhstan and Uzbekistan.
- steam turbines
- compressor trains
State the machine type, the model and the serial number in your request.
The manufacturer’s names and designations are given to identify the equipment we service. The trademarks belong to their owner.
Key facts
- Testing of the digital model of a 2.4 MW Howden steam turbine has been completed to prepare the control system for commissioning (2024).
- Inspections and repairs of steam turbines and compressor trains.
- Our engineers were trained at the manufacturers’ works.
Equipment and types of work
| Equipment | Inspections | Repair | Control system modelling |
|---|---|---|---|
| Steam turbines | ✓ | ✓ | ✓ |
| Compressor trains | ✓ | ✓ | — |
Which Howden machines are found on site
Howden traces its history back to 1854 (Glasgow, Scotland) and makes fans, compressors and steam turbines. KK&K steam turbines and centrifugal compressors are built at the Frankenthal works in Germany — formerly Kühnle, Kopp & Kausch, which belonged to Siemens from 2006 to 2017. Steam turbines of up to 40 MW are also made by the UK business Peter Brotherhood, and multi-stage compressors are sold under the Czech CKD brand as well. HV-TURBO turbo blowers (TURBLEX in North America) are developed in Helsingør, Denmark. Since 2023 Howden has been part of Chart Industries, so the manufacturer’s recent literature carries the Chart name.
| Range | Design | Output or capacity |
|---|---|---|
| BASE | single-stage impulse turbine: back-pressure or condensing as a generator drive, back-pressure as a mechanical drive | 75–1,000 kW as a generator drive; up to 750 kW as a drive for pumps and fans |
| CORE, MONO | turbines with an integral gearbox, back-pressure or condensing; steam up to 131 bar(a) and 530 °C | up to 6 MW |
| TWIN, TRI | dual- and triple-casing turbines on a common gearbox, with controlled steam extraction | up to 12 MW (TWIN up to 7 MW in the current range) |
| HV-TURBO, KA series | single-stage integrally geared centrifugal compressors for air | 1,000–125,000 m³/h, pressure rise up to 2.25 bar (up to 4 bar in the two-stage version), 10–2,000 kW |
| KK&K, CKD | single- and multi-stage centrifugal compressors for process gases | pressure ratio up to 3.5 (single-stage) and up to 10 (multi-stage) |
The full Howden steam turbine range covers 75 kW to 40 MW. Machines built before 2017 often carry earlier designations: AFA, CFA, CFR and TWIN CA under KK&K, and SST-040, SST-050, SST-060, SST-110 and SST-111 under Siemens. The SST-060 and SST-110 are on the list of models for which we supply Siemens Energy spare parts.
Our list of serviced equipment covers Howden condensing and back-pressure steam turbines and Howden compressor trains — single-shaft and integrally geared, single- and multi-stage — rated from 750 kW to 80 MW. If you have a Howden screw, reciprocating or diaphragm compressor, send us the model and serial number and we will tell you whether we can do the work.
Howden steam turbines: what is checked during service
BASE generator sets and MONO, TWIN and TRI turbines are supplied as packages: the turbine with its gearbox and the lube oil system sit on a common base frame, with the generator mounted there too on generator sets. CORE is supplied as a turbine and gearbox only, and a packager completes the unit. For the mechanical-drive BASE and for CORE the manufacturer states compliance with API 611 and API 612 provided the purchaser accepts the overhung wheel and the integral gearbox. Steam flow can be controlled by nozzle-group valves: each valve opens its own group of nozzles, so at part load throttling losses are lower than with a single control valve. Typical scope of work:
- Steam admission: tightness and stroke of the trip valve and the nozzle-group valves, condition of seats and stems, closing time on a trip signal.
- Steam path: salt deposits, erosion and rubbing on nozzles and blades; deposits reduce output at the same steam flow.
- Shaft seals: wear of labyrinths or carbon rings, steam leaking towards the bearings and into the oil.
- Gearbox and bearings: tooth contact pattern, bearing clearances, vibration of the high-speed shaft, which is analysed during vibration diagnostics.
- Protection: overspeed protection tests, checks of the governor and the speed sensors.
The scope is set by the machine’s operating manual or by the customer’s request. Control, vibration monitoring and speed monitoring systems of steam turbines are also on our list of serviced equipment. An example for this make is given in the news item on the digital model of a 2.4 MW Howden steam turbine.
Howden turbo compressors and blowers
HV-TURBO KA series turbo blowers are single-stage integrally geared centrifugal compressors: a semi-open impeller machined from forged aluminium alloy sits on the high-speed pinion shaft, and the drive is usually an electric motor. They deliver oil-free air for aeration at wastewater treatment plants, for oxidation in flue gas desulphurisation, and to furnaces and sulphur recovery units. Capacity is controlled by adjustable inlet guide vanes (13–24 vanes), adjustable diffuser vanes (17–20) or both; at constant speed, flow can be reduced to 45% of rated.
Howden process compressors come as single-shaft and integrally geared machines. Service covers:
- the gearbox: tooth mesh, bearings and axial position of the pinion shaft, vibration of the high-speed shaft;
- the impeller: the clearance between the semi-open impeller and the casing, which governs efficiency, as well as erosion and deposits;
- inlet guide vane and diffuser vane actuators and linkages: backlash and whether the vane position matches the control system signal;
- surge protection: the blow-off or recycle valve and the setting of the surge control line to the machine’s actual characteristic.
Anti-surge protection and capacity control systems are on our list of serviced equipment — see the anti-surge control page for details.
Spare parts for this manufacturer
Spare parts and consumables for Howden turbines and compressors are selected against an enquiry stating the model and the serial number.
Control system
What the inspection report contains
The inspection report for a Howden machine is the document the customer uses to plan the repair and the budget, so it contains measurements as well as conclusions: flow path and seal clearances, rotor run-out, bearing condition with photographs, vibration measurements before and after the work, governing and protection system parameters. For each component we give a condition assessment and the period for which it can be left in service.
The second part of the report is the recommendations: a prioritised spare parts list with indicative lead times, proposals for the scope of the next outage, remarks on operation and the control system. The report is handed over electronically and kept by us so that the trend can be compared at the next inspection.
Questions and answers
Why build a digital model of a turbine before replacing its control system?
The model reproduces the behaviour of the machine across operating modes: the logic of the new control system is checked on it and the staff are trained before start-up on the real equipment. This is how testing of the digital model of the 2.4 MW Howden steam turbine was completed to prepare the control system for commissioning.
Are you an authorised Howden service partner?
No. Energy Management LLC is an independent service company and does not act on behalf of Howden or Chart Industries; the manufacturer’s name is given only to identify the equipment we service. We work to the machine’s documentation and operating manual, checking compliance with the manufacturer’s requirements. To assess the work on your machine, state its model and serial number in your request.
Other manufacturers
Manufacturer names and designations are given to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.