Service by manufacturer

Service for Hanwha compressors

Maintenance and repair of Hanwha compressor trains: inspections, diagnostics, control system adjustment, spare parts supply. An independent service company; our engineers were trained at the manufacturers’ works. We work in Russia, Belarus, Kazakhstan and Uzbekistan.

Equipment we service
  • compressor trains

State the model and the serial number of the train in your request.

The manufacturer’s names and designations are given to identify the equipment we service. The trademarks belong to their owner.

Key facts

  • Inspections of compressor trains by running hours and on request.
  • Diagnostics: vibration, condition of seals and bearings, stage performance.
  • Adjustment of control, protection and anti-surge systems.
  • Spare parts supply against an enquiry with the model and the serial number.

Equipment and types of work

Types of work by Hanwha equipment: ✓ — we carry it out
EquipmentInspectionsDiagnosticsControl system adjustmentSpare parts
Compressor trains✓✓✓✓

Which Hanwha compressors are found at industrial plants

Hanwha Power is a South Korean manufacturer of centrifugal compressors, mostly integrally geared ones: high-speed pinion shafts with impellers at their ends are arranged around a central bull gear. The manufacturer has been building turbo compressors since 1997. Until 2015 the company was part of the Samsung group (from 2000 under the name Samsung Techwin), then it became Hanwha Techwin; in 2017 its energy equipment business was spun off as Hanwha Power Systems, which was renamed Hanwha Power in 2026. The nameplate of a unit may carry any of these names: they are all machines from the same manufacturer.

Hanwha compressors according to the manufacturer’s catalogues
TypeMedium and applicationStandard
SM and SM100 series oil-free air compressorsplant and instrument air; Class 0 for oil content to ISO 8573-1API 672
SE series process air and gas compressorsair, hydrocarbon gases, nitrogen, CO₂; one to six stagesAPI 617, API 672
Fuel gas booster compressorsfuel gas supply to gas turbines at power plantsAPI 617
Boil-off gas (BOG) compressors and expandersLNG plants and terminals, LNG carriersAPI 617
Main and booster air compressors (MAC, BAC)air separation unitsAPI 672 or API 617

We identify your exact machine from the nameplate and the manufacturer’s documentation. How the requirements of API 617 and API 672 differ, and how a compressor with a built-in gearbox is designed, is explained on the integrally geared compressors page.

What is checked during an inspection of a Hanwha compressor

Hanwha air and gas machines are built to the same layout, a gearbox with a central bull gear and pinion shafts, so the main inspection points are the same for both.

  • Gearbox. The tooth contact pattern and the condition of the tooth flanks of the bull gear and pinions. On the SM series, according to the manufacturer, the gearbox casing is horizontally split and the gear mesh can be inspected without dismantling the stages.
  • Bearings. The pinion shafts run in tilting-pad journal bearings, and the bull gear shaft in a sleeve journal bearing and a thrust bearing; all of them are plain bearings. Clearances, the condition of the babbitt, and vibration and temperature trends are checked.
  • Seals. Depending on the medium, labyrinth seals, carbon ring seals or dry gas seals. On oil-free air machines, the seals separate the gearbox oil space from the flow path, and the purity of the compressed air depends on their condition.
  • Coolers. Fouling of the intercoolers raises the inlet temperature of the next stage and the power consumption; fouling of the aftercooler raises the temperature of the compressed air or gas leaving the unit. On the SM series, water flows inside the tubes, which makes the bundles easier to clean.
  • Capacity control. The actuator and travel of the inlet guide vanes, the blow-off or recycle valve, protection setpoints.
  • Lube oil system. Pumps, filters, oil cooler, oil mist separator. Requirements for oil systems are set by API 614, and for dry gas seal support systems by API 692.

Spare parts for this manufacturer

Spare parts and consumables for Hanwha compressors are selected against an enquiry stating the model and the serial number.

What to attach to a service request for a Hanwha compressor

The more complete the data before the site visit, the more precise the work programme and the list of spare parts.

  • the model and serial number from the nameplate, even if it says Samsung Techwin or Hanwha Techwin;
  • the medium and operating conditions: air or gas and its composition, suction and discharge pressures, flow;
  • running hours, and the date and scope of the last inspection or overhaul;
  • vibration and bearing temperature trends, the log of alarms and trips;
  • the type of seals and of the unit control system;
  • which manufacturer’s documentation is available on site: operating manual, drawings, spare parts catalogue.

If documentation is scarce or the condition of the machine is unclear, we start with a diagnostic survey: it assesses the current condition of the equipment and spare parts and helps forecast upcoming maintenance and the components required.

Control system

Capacity control and surge protection

At constant speed, the capacity of Hanwha compressors is controlled by adjustable inlet guide vanes (on SE series machines, on the first stage only or on all stages) or by a variable geometry diffuser. When the flow approaches the surge limit, an air compressor blows part of the air off to atmosphere, while a gas compressor recycles gas to suction. According to the manufacturer, SM series air machines are controlled as standard by a programmable logic controller with a touch-screen panel, and remote monitoring is provided.

Anti-surge protection and capacity control systems are part of the equipment we service, and our services include upgrading and repairing control systems. Where neither the original software nor direct support from the manufacturer is available, the control logic is tested on a digital model of the unit before work on site.

Typical faults and how to spot them in the trends

Most centrifugal compressor failures announce themselves in advance. Rising seal gas leakage and filter differential point to dry gas seal problems or gas quality. A slow rise in vibration at one bearing means bearing wear or imbalance due to deposits on the impeller; a sharp rise with a change in the spectrum means damage. A drop in capacity at the same speed and pressures means flow path fouling or labyrinth wear; frequent approaches to the surge line mean a change in gas composition or suction conditions.

The company’s engineers assess such trends remotely from a control system export and advise whether the planned inspection can be waited for or an unscheduled shutdown is needed. This is part of the service contract at no extra cost and the cheapest way to avoid an emergency repair.

Questions and answers

Which inspections are due by running hours?

The scope and the intervals follow the operating manual: flow path checks, inspection of seals and bearings, testing of protection systems. We agree the programme against the actual running hours and operating regimes.

How do I order spare parts?

Send us the model and serial number of the unit, the part catalogue numbers or names and the quantities, and we will tell you whether we can supply them. We confirm the origin of supplied parts by catalogue numbers, markings and accompanying documents; every batch is inspected by our engineers before shipment, and the warranty on the parts supplied is provided by Energy Management LLC.

Do you service Samsung Techwin compressors?

Yes. Samsung Techwin turbo compressors come from the same manufacturer as Hanwha machines: the company joined the Hanwha group in 2015, its compressors have been built by Hanwha Power Systems since 2017 and by Hanwha Power since 2026. We service Hanwha compressor trains, and the name on the nameplate does not change the scope of work. State the model, serial number, medium and running hours in your request so that we can define the inspection programme and the parts required.

Can a Hanwha compressor be serviced without support from the manufacturer?

Yes. Energy Management LLC is an independent service company: maintenance and repairs are carried out to the scope of the operating manual or at the customer’s request. If little documentation is available on site, the condition of the machine and its spare parts is assessed by a diagnostic survey. Where the original software is not available, changes to the control system are tested on a digital model of the unit before work on site.

Other manufacturers

Manufacturer names and designations are given to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.

CallSend a request
Service requestRequest a quotationData sheet