Service by manufacturer

Service for Dresser-Rand compressors and steam turbines

Independent service for Dresser-Rand Datum compressors (Datum, R, C, A, I/ICS, P), ESH, PHE, HSE, HHE (FB, VB, VG, VL), BDC-12H, BDC-18H3, MOS, HOS, HOSS, M/B-line and RLA, RLVA, RLHA, AVTTW, 2TA, GAF, K, R, RS, TT14, TT22, EMD steam turbines: maintenance, repairs, original spare parts and assemblies. The company specialises in Siemens Energy and Dresser-Rand equipment; our engineers were trained at the manufacturers’ works.

Models we service
  • Datum
  • Datum R
  • Datum C
  • Datum A
  • Datum I (ICS)
  • Datum P
  • ESH
  • PHE
  • HSE
  • HHE-FB
  • HHE-VB
  • HHE-VG

And 19 more models — in the check below and in the spare parts catalogue.

The manufacturer’s names and designations are given to identify the equipment we service. The trademarks belong to their owner.

Key facts

  • Compressor trains of 19 types — from Datum to M/B-line.
  • Steam turbines of 12 types, including the small RLA, RLVA and RLH — up to 1865 kW.
  • Original spare parts and assemblies: we confirm the origin by catalogue numbers, markings and accompanying documents.
  • Dry gas seals and other part groups are in the spare parts catalogue.
  • Our engineers were trained at the manufacturers’ works.

Equipment and types of work

Types of work by Dresser-Rand equipment: ✓ — we carry it out
EquipmentInspectionsRepairSpare parts and assembliesControl system upgrades
Datum compressors✓✓✓✓
ESH, PHE, HSE, HHE compressors✓✓✓✓
BDC, MOS, HOS, HOSS, M/B-line compressors✓✓✓✓
RLA, RLVA, RLHA steam turbines✓✓✓✓
AVTTW, 2TA, GAF, K, R, RS, TT14, TT22, EMD steam turbines✓✓✓✓

Dresser-Rand compressors: Datum centrifugal and reciprocating machines

The Dresser-Rand compressors in our catalogue are the Datum centrifugal lines, reciprocating machines and M/B-line models (their design is checked against the nameplate and the documentation). The manufacturer introduced the Datum line in 1995. The design can be read from the model designation: in D10R9B, 10 is the frame size, R stands for a radially split casing, 9 is the number of impellers and B denotes a back-to-back arrangement of the sections.

Dresser-Rand compressors in the catalogue: type and design (manufacturer’s data)
ModelsTypeDesign
Datum Rcentrifugalradially split (barrel) casing, discharge pressure up to 15,000 psig (about 1000 bar)
Datum Acentrifugalhorizontally split casing, discharge pressure up to 900 psig (about 62 bar)
Datum Pcentrifugal pipeline boosterbarrel casing
Datum Ccompact centrifugalhermetically sealed casing with an integral high-speed motor, magnetic bearings that need no oil lubrication
Datum I (ICS)compression systemDatum C compressor, centrifugal liquid separator, coolers and control system in a single module
ESH, PHE, HSE, HHE-FB, HHE-VB, HHE-VG, HHE-VL, BDC-12H, BDC-18H3reciprocating process compressorto API 618
MOS, HOS, HOSShigh- and medium-speed reciprocating compressorto ISO 13631 (API 11P)

According to the manufacturer, the Datum rotor, together with the diaphragms, bearings, seals and instruments, forms a module that is assembled and checked outside the casing and installed as a unit, so a spare module kept on site shortens downtime during repairs. The bearing housings are horizontally split, so the drive-end bearing can be replaced without removing the coupling. The manufacturer has used various shaft seals, including labyrinth seals, oil film seals and dry gas seals; the type is stated in the documentation of the specific machine.

Small steam turbines RLA, RLVA, RLH

Ratings of small Dresser-Rand turbines
SeriesOutputSpeedInlet steamBack pressure
RLAup to 745 kWup to 6000 rpmup to 440 °C and 47 barup to 12 bar
RLVAup to 745 kW · vertical shaftup to 6000 rpmup to 440 °C and 47 barup to 12 bar
RLHup to 1865 kWup to 6000 rpmup to 510 °C and 97 barup to 22 bar

More about the small turbines

Dresser-Rand steam turbines: single-stage and multistage

Besides the small turbines described above, our catalogue includes higher-output single-stage Dresser-Rand turbines and multistage machines. They drive pumps, fans, compressors and generators; the manufacturer builds most models to API 611 (general-purpose turbines) or API 612 (special-purpose turbines).

Dresser-Rand steam turbines in the catalogue: stages and output (manufacturer’s data)
ModelsStagesOutput, up toDesign
RLHA12980 kWhorizontally split casing, sleeve bearings, four frame sizes
2TA13750 kWhorizontally split casing, between-bearing rotor, up to 12,500 rpm
AVTTW14500 kWoverhung rotor, horizontal or vertical arrangement, direct drive or integral gear, up to 14,500 rpm
GAFup to 63500 kWcondensing or back-pressure, up to 6000 rpm
Kup to 124850 kWcondensing or back-pressure, up to 10,000 rpm, not to API 611/612
R, RSup to 1525,000 kWuncontrolled bleeds and one controlled extraction or induction, up to 15,000 rpm

Models TT14, TT22 and EMD, as well as machines modified over their service life, are checked against the nameplate and the documentation. In 2024 the company’s order book included Dresser-Rand rotating equipment, as stated in the news item of 22 July 2024.

Spare parts for this manufacturer

A catalogue of Datum and Dresser-Rand steam turbine models and part groups from bearings and seals to flow path assemblies. Enquiries state the model and the serial number.

Control system

Dresser-Rand reciprocating compressors: service notes

On reciprocating compressors — ESH, PHE, HSE, HHE, BDC, MOS, HOS, HOSS — the service life is set by fast-wearing parts: valves and their plates, piston and rider rings, rod packing. Their condition is visible from valve cover temperatures, gas pressure and temperature by stage and packing leakage; maintenance is planned by the running hours of each cylinder and the number of starts.

During an inspection we also check the crossheads, connecting rod bearings, cylinder lubrication system and pulsation dampers, the foundation bolting and alignment with the driver. For reciprocating machines it is sensible to keep spare parts in the emergency stock as sets per frame size — valves and rings are replaced more often than other items.

Emergency stock for a Dresser-Rand fleet

For Dresser-Rand machines we recommend an emergency stock by frame size: dry gas seal cartridges and bearing sets for Datum compressors, valve, ring and packing sets for reciprocating machines, carbon seal rings and bearings for small steam turbines. The list is drawn up with the customer by fleet and running hours — see the Dresser-Rand spare parts page.

Questions and answers

Which Dresser-Rand compressors do you service?

Datum (Datum, R, C, A, I/ICS, P), ESH, PHE, HSE, HHE (FB, VB, VG, VL), BDC-12H, BDC-18H3, MOS, HOS, HOSS and M/B-line. If your model is not listed, send a request with the model and the serial number and we will check.

How is a site visit organised?

After the enquiry we agree site access, the make-up of the crew and the tooling. Response and call-out times are agreed with the customer for each request and kept as short as possible.

Do you supply complete assemblies?

Yes: complete bearings, trip valves, turning gear, governing and steam admission units, flow path components. Parts are selected against an enquiry with the model and the serial number. We confirm the origin by catalogue numbers, markings and accompanying documents; the warranty on the parts supplied is provided by Energy Management LLC.

Are Dresser-Rand and Siemens Energy now the same manufacturer?

Yes. Siemens completed its acquisition of Dresser-Rand on 30 June 2015, and these lines now belong to Siemens Energy: it builds the steam turbines under the D-R designation and the reciprocating compressors under their original model designations. For service and spare parts selection, what matters is the model and serial number of the machine rather than the manufacturer’s name on the nameplate. Energy Management LLC is an independent service company.

Other manufacturers

Manufacturer names and designations are given to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.

CallSend a request
Service requestRequest a quotationData sheet