Service for turbines, compressors and high-voltage equipment
Support over the whole life: from inspection before erection to major overhauls and control system upgrades. Our engineers are trained at the manufacturers’ works; we work in Russia, Belarus, Kazakhstan and Uzbekistan — onshore and offshore.
Service over the whole life
The real sequence of work with the equipment: the numbering follows the order of the stages.
- 1
Inspection and diagnostics
Inspection of previously supplied equipment, assessment of system condition and completeness. Condition assessment before erection, commissioning and repair.
Inspections - 2
Installation supervision and commissioning
Technical support during erection, commissioning and handover. The full start-up cycle for turbines, compressors and turbine generators.
Supervision and commissioning - 3
Compliance with the manufacturer’s requirements
Verification that erection and operation follow the manufacturer’s documentation. Findings are recorded in a report.
Turbine and compressor service - 4
Personnel training
Training in efficient and safe operation under a programme agreed with the customer.
Training - 5
Maintenance and repair
Routine maintenance, replacement and repair: minor inspections, medium and major overhauls, on request or to the scope of the operating manual.
Maintenance and repair - 6
Refurbishment and upgrades
Upgrades and repair of equipment and control systems; combustion tuning, vibration diagnostics and field balancing.
Vibration diagnostics - 7
Spare parts
Original spare parts and consumables for Siemens Energy and Dresser-Rand compressors and steam turbines.
Spare parts - 8
Remote monitoring
Remote monitoring and management of the plant and its processes; advice in abnormal situations.
Process control systems
Three service lines

Service for gas and steam turbines and compressors, 750 kW – 80 MW
We service centrifugal compressor trains and gas and steam turbines rated from 750 kW to 80 MW made by Siemens Energy, Dresser-Rand, Mitsubishi Heavy Industries, Howden, Kobelco and Hanwha. Our specialists have been trained at the manufacturers’ works. We work in Russia, Belarus, Kazakhstan and Uzbekistan. The aim is higher output and reliability, longer intervals between overhauls and less downtime.

Service for high-voltage equipment 110–750 kV
We service GIS, SF6 circuit breakers, disconnectors and earthing switches, current and voltage transformers and surge arresters rated 110–750 kV: preliminary inspection, diagnostic survey, maintenance without pumping out the SF6, complex repair at the works, emergency stock, upgrades, installation supervision and training. Testing is done by our own test laboratory up to 750 kV. We operate in Russia, Belarus, Kazakhstan and Uzbekistan.

High-voltage test laboratory: on-site testing of 110–750 kV equipment
We test GIS, SF6 circuit breakers, disconnectors and current and voltage transformers at the installation site with two mobile resonant test systems, WRV 3.6/680 M and WRV 1.5/680 G. The laboratory is registered with Rostechnadzor (certificate No. 9834 of 20 December 2024). We travel to substations in Russia and the countries where we work.

Original spare parts for compressors and steam turbines
We supply original spare parts and consumables for Siemens Energy and Dresser-Rand compressors and steam turbines — from filter elements to rotors and dry gas seals. We confirm the origin of parts by catalogue numbers, markings and accompanying documents.
By manufacturer
All manufacturersManufacturer names and designations are given to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.
Russia · Belarus · Kazakhstan · Uzbekistan
Onshore and offshore, in demanding climates: Yamal, the Gydan Peninsula, Krasnoyarsk, Ust-Ilimsk, the Baltic and the Barents Sea. Five offices in Russia — Moscow, St Petersburg, Perm, Krasnodar and Podolsk.
- Sabetta
- Gydan
- Krasnoyarsk
- Ust-Ilimsk
- Vyborg
- Beloozersk
- Minsk Region
- Kommunar

Projects and letters of appreciation
Belenergo: supervision and commissioning of 11 SGT-800 units
11 × SGT-800 · full load in 15 minutes
Project · Yamalo-Nenets Autonomous AreaArctic LNG 2: compressor installation and commissioning
feed gas compressors · boil-off gas compressors
“We note that in carrying out the work the staff of Energy Management LLC proved to be qualified and responsible specialists.”
Arkhangelsk Trawl Fleet · translated from Russian · letters of appreciation“…the engineering and commissioning work on the process control system was carried out to a consistently high standard of quality.”
Belenergomash-BZEM LLC · letter No. 018-0042 of 5 February 2024 · translated from Russian · letters of appreciationQuestions and answers
Whose equipment do you service?
Siemens Energy gas turbines; Siemens Energy, Dresser-Rand, Mitsubishi Heavy Industries and Howden <a class="term-link" href="../glossary/steam-turbine/index.html" title="What is a steam turbine">steam turbines</a> and compressors; Kobelco and Hanwha compressors; ratings from 750 kW to 80 MW. High-voltage equipment for 110–750 kV: GIS, circuit breakers, disconnectors, current and voltage transformers.
How quickly do you reply to an enquiry and get to site?
Response and call-out times are agreed with the customer for each request and kept as short as possible.
What should you do after an emergency shutdown?
Call +7 (495) 737-17-17 or send a service request with the “Equipment is down” box ticked. An engineer from the relevant team will contact you, ask for the nameplate data, event logs and running hours, and agree the site visit.
Do you work without the original software?
Yes. We upgrade control systems and move them to SIMATIC PCS7, TIA Portal and the Russian Ezan platform, keeping the protection and governing logic. More in the process control section.
Are resident engineers available on site?
Yes: engineers are permanently based at the customer’s site, keep the log, take part in planned and unplanned work and train the personnel.
Do you sign long-term service contracts?
Yes. Such a contract covers planned <a class="term-link" href="../glossary/gas-turbine-inspection/index.html" title="What is a gas turbine inspection">inspections</a>, maintenance, an emergency stock of parts, advice and priority site visits. The scope is agreed for each site.