Service · spare parts

Siemens Energy spare parts for gas and steam turbines and compressors

We supply original spare parts and consumables for Siemens Energy SGT-100 – SGT-800 gas turbines, SST-060 – SST-900 steam turbines and STC compressors — from filter elements to rotors and nozzle blocks. We confirm the origin of parts by catalogue numbers, markings and accompanying documents; every batch is inspected by our engineers before shipment: incoming inspection and a check against the machine documentation.

SST steam turbines11modelsSTC compressors13modelsProduct groups17
A steam turbine diaphragm with nozzle blades

What we supply

  • filter elements
  • instrumentation: sensors, proximity probes
  • trip valves and their spare parts
  • turning gear
  • oil system equipment and parts
  • complete bearings and bearing shells
  • seals of all types
  • casing fasteners
  • governing and steam admission unit parts
  • flow path components: rotors, diaphragm carriers, seal rings, blades, nozzle blocks
  • couplings
  • control and vibration monitoring system spares

Models

Siemens Energy gas turbine, steam turbine and compressor models for which we supply spare parts
Machine typeModelsService
Gas turbinesSGT-100, SGT-200, SGT-300, SGT-400, SGT-600, SGT-700, SGT-800Gas turbine service
Steam turbinesSST-060, SST-110, SST-150, SST-300, SST-350, SST-400, SST-500, SST-600, SST-700, SST-800, SST-900Steam turbine service
Compressor trainsSTC-SH, STC-SV, STC-SR, STC-SX, STC-SP, STC-STO, STC-GV, STC-GVT, STC-GC, STC-GT, STC-GTO, STC-GO, STC-SOFCompressor service

Manufacturer names and designations are given to identify the equipment we service. Trademarks belong to their respective owners. Energy Management LLC is an independent service company.

How to order

  1. 1

    Enquiry data sheet

    Model, serial number, part catalogue numbers or names, quantity; nameplate photo and specification.

  2. 2

    Selection

    Our engineer checks the items against the machine documentation and clarifies substitutions.

  3. 3

    Proposal

    A technical and commercial proposal with catalogue numbers.

  4. 4

    Incoming inspection and delivery

    Inspection of the batch by the company's engineers, accompanying documents, shipment.

Why customers choose us

  1. 1

    End-to-end approach

    From diagnostics and the repair plan through to handover into operation.

  2. 2

    Qualified engineers

    Extensive experience with Siemens Energy and Dresser-Rand compressors and steam turbines.

  3. 3

    Original parts

    Origin confirmed by catalogue numbers, markings and accompanying documents; every batch is inspected by our engineers before shipment.

  4. 4

    Energy Management LLC warranty

    The warranty on supplied spare parts is provided by Energy Management LLC; warranty cases are handled by our own specialists.

Causes of failure and recommendations

Why turbines and compressors fail

  • operation outside the rules
  • unsuitable components
  • excessive vibration
  • foundation defects or the influence of adjacent equipment
  • late replacement of wearing parts
  • end of service life

How to extend service life

  • regular diagnostics and maintenance
  • consumables and parts specified by the manufacturer
  • qualified specialists

Reading part numbers and the parts list

Every SST steam turbine and STC compressor has a spare parts list — a register of items with catalogue numbers tied to the machine’s serial number. It is this list, not a general catalogue, that defines which part fits: machines of the same model differ in execution, materials and revisions. Look for the parts list in the data book, in the delivery documentation or in previous repair reports; if it is missing, an engineer will reconstruct it from the documentation and measurements during an inspection.

Catalogue numbers are superseded over time: a part is upgraded, its material or supplier changes, and the item receives a new number while the old one is marked as replaced. So in a request it is enough to quote the number from the parts list as it is — during selection the engineer checks it against the current number and states the replacement in the proposal if one has occurred. Photos of the machine nameplate and of the part itself with its markings help: they settle questions about the execution.

Part groups by replacement interval

It is convenient to plan purchases by when a part will be needed.

  • At every service. Lube oil and seal gas filter elements, gaskets and O-rings of split lines, consumables of the governing system.
  • By running hours. Bearing shells and bearings, shaft seals, coupling elements, sensors and proximity probes nearing the end of their life, turning gear spares.
  • Based on inspection results. Blades, diaphragms and their carriers, nozzle blocks, flow path sealing rings, valves and their seats, rotors — the decision is made on the actual condition.
  • Emergency stock. Long-lead items without which the machine cannot run: dry gas seal cartridges, bearing sets, a complete trip valve, key elements of the control and vibration monitoring systems.

For long-term contracts we draw up an annual supply plan based on the inspection schedule and running hours — so parts arrive for the planned outage instead of being ordered after it.

SGT gas turbines: selection notes

For SGT-100 – SGT-800 gas turbines most of the supply is hot section parts: combustion chamber liners and transition ducts, nozzle and rotor blades of the first stages, flow path seals. These parts are replaced by equivalent operating hours and number of starts, so the enquiry is best prepared together with the hot section inspection plan.

A separate group is the burners and parts of the dry low emissions (DLE) combustion system: fuel nozzles, igniters, flame and pulsation sensors; after they are replaced, combustion tuning is carried out. Filter elements of the air intake, fuel and lube oil systems, seals and bearings are replaced by operating hours. Spares for the control and protection system — I/O modules, sensors, actuators — are selected to match the installed control system hardware.

SST steam turbines: selection notes

The SST-060 to SST-900 range covers machines from small mechanical drive turbines to power generation units, and the scope of supply depends strongly on the frame size. For small turbines the typical items are end seals and their rings, bearings, governor and steam admission components, nozzle segments: these parts work under severe conditions and are replaced by running hours. For medium and large turbines the bulk of the scope falls on the flow path — blades, diaphragms, sealing rings — and on the valves: stop and control valves, their stems, seats and actuators.

During selection we take into account the steam parameters and the turbine execution: blade and seal materials, governor type, the presence of extractions and controlled stages. Flow path items are as a rule replaced based on inspection results with clearance measurements — so a request for such parts is best prepared together with the repair plan rather than separately.

STC compressors: selection notes

For STC compressor trains the main groups are seals, bearings and the seal gas system. Dry gas seals are supplied as cartridges for a specific serial number and gas composition; barrier and labyrinth seals, filter elements and seal gas panel regulators are ordered together with them. Bearings — journal and thrust — are selected by the machine execution; for integrally geared multi-shaft compressors, gearbox parts and gear shaft seals are added.

Flow path items — impellers, diffusers, labyrinths — are ordered based on inspection results, once wear and damage are known. Spares for the control, anti-surge protection and vibration monitoring systems are included in the same list: a sensor or module failure stops the machine just as a mechanical part failure does. All items undergo incoming inspection by our engineers and are supplied with accompanying documents; the warranty is given by Energy Management LLC.

Incoming inspection: what we check before dispatch

Every batch is checked by our engineers before dispatch, and this is no formality. We verify catalogue numbers against the request and the machine’s parts list, the markings on the parts and packaging, completeness and accompanying documents — certificates, data sheets, test reports where they are provided. For critical items — geometry and surface condition: bearing shell seating dimensions, seal ring faces, blade edges; for seals and elastomers — intact packaging and shelf life.

The result is recorded in an incoming inspection report handed to the customer with the batch. If an item fails the check, it is not dispatched — the customer learns of the delay before the crew goes to site, not during disassembly of the machine.

Control and vibration monitoring system spares

A failed sensor, I/O module or power supply stops a turbine as surely as a broken mechanical part, and electronics often have longer lead times. That is why the spare parts list for Siemens Energy machines includes control and vibration monitoring system spares: vibration and axial displacement sensors, proximity probes and their cables, bearing temperature sensors, controller modules and power supplies, anti-surge protection components for compressors.

For platforms without manufacturer support we select replacements in agreement with the customer and verify their compatibility on a digital model before installation — just as in control system migration.

Questions and answers

What data is needed to select a part?

The machine model and serial number, the part catalogue number or name and the quantity. A nameplate photo and specification help — attach them to the enquiry data sheet.

How do you confirm the origin of parts?

By catalogue numbers, markings and accompanying documents. Every batch is inspected by our engineers before shipment: incoming inspection and a check against the machine documentation.

Who provides the warranty on spare parts?

Energy Management LLC. Warranty cases are handled by our own specialists; the terms are set by the supply contract.

Do you supply parts for machines no longer in production?

Yes: we select by model and serial number, where necessary from drawings and samples.

Engineering team

Rotating equipment service
CallSend a request
Service requestRequest a quotationData sheet