Project · Pulp and paper · Ust-Ilimsk

Ilim: board machine control system in Ust-Ilimsk

Capacity600thousand tonnes of board a year Year2023 Drivesmulti-motorsynchronisation and protection Systemprocess controlwith industry libraries
Ust-Ilimsk pulp and board mill, aerial view

Project data

Customer
Ilim
Facility
Ust-Ilimsk pulp and board mill
Region
Ust-Ilimsk
Industry
pulp and paper
Types of work
commissioning of the control system and drives
Period
2023

The task

One of the world’s largest board machines, with a capacity of 600 thousand tonnes a year, was being started up at the Ilim Group’s Ust-Ilimsk pulp and board mill. The task was to commission the machine control system and its multi-motor drives.

The facility: the new mill’s board machine

The board machine is the key unit of Ilim Group’s new pulp and board mill in Ust-Ilimsk, built under the Big Ust-Ilimsk investment project. The machine produces kraftliner, a containerboard made from virgin fibre for packaging. It produced its first board on 16 July 2023. The machine’s technical data below are taken from public sources:

Ust-Ilimsk board machine: technical data (public sources, 2019–2023)
ParameterValue
Basis weight, g/m²80–175
Main basis weight, g/m²125
Web width at the reel, m9.5
Design speed at the reel, m/min1,200

What we did

  1. Commissioning

    Process control system with industry libraries

    Commissioning of the board machine control system based on industry libraries for pulp and paper production.

  2. Commissioning

    Drive synchronisation and protection

    Software for the synchronisation and protection of the machine’s multi-motor drives.

  3. Commissioning

    Soft starters and variable-speed drives

    Soft starters and variable-frequency drives of the machine sections.

How a board machine’s multi-motor drive works

A multi-motor drive keeps the speeds of all machine sections coordinated. The wire section, presses, dryer groups, calender and reel each have their own motors, and the speed of each section is set from the common machine speed with a small draw, the speed difference between adjacent sections. If the draw is smaller than required, the web goes slack; if it is larger, the web breaks. These are general principles for any modern paper or board machine, not a list of the work done on site. The drive system handles four related tasks:

  • synchronisation: acceleration and deceleration of the whole machine, crawl and jog modes, and holding the draw between sections;
  • load sharing: motors mechanically coupled through rolls, felts or the wire share the load torque, with one master drive holding the speed and the others following its torque;
  • protection and interlocks: a coordinated response of all sections to a web break, an overload or an emergency stop;
  • motor starting: soft starters reduce the inrush current and torque shock of motors that need no speed control, while variable-frequency drives set the speed of the sections.

For these tasks, process control systems for pulp and paper production use industry libraries of ready-made function blocks, which are tuned to the mechanics of the particular machine during commissioning. Other tasks at pulp and paper mills, from steam turbines to CHP boilers, are covered on the pulp and paper industry page.

The result

The work was completed in 2023: the control system and drives of the board machine with a capacity of 600 thousand tonnes a year have been commissioned.

Feedback on the work

Feedback on the work at the Ust-Ilimsk mill came from FPPT (Voith Paper Technology Russia). FPPT’s general director writes (translated from Russian): “I would like to express my sincere gratitude to the Energy Management LLC team for their contribution to starting up the board machine at the Ust-Ilimsk pulp and board mill. The commissioning of the control system and drives was carried out by the specialists of Energy Management LLC to the highest professional standard…”

The letter was published on our website on 5 February 2024: the scan is on the letters of appreciation page, and the story is told in the news item about the letter. Another of our pulp and paper projects is the automation of a steam boiler at the Knauf Petroboard CHP plant.

A board machine (illustration)
Illustration. The board machine
A control system mimic diagram on the operator screen
Illustration. Control system mimic diagram

Equipment and services in this project

Similar projects

CallSend a request