What is a paper machine and how its control system is built
A paper (or board) machine is a unit up to 200 metres long that forms, dewaters, presses, dries and reels a web of paper or board from a water suspension of fibre. Dozens of sections are driven by a sectional multi-motor drive with precise speed synchronisation; the control system holds web tension, moisture and basis weight.
Key facts
- Up to 200 m long: forming, pressing, drying, calendering, reeling.
- Modern machines run at up to 1,500–2,000 m/min.
- Each section has its own motor with a variable-frequency drive.
- The control system holds basis weight, moisture and web tension.
- Company project: the board machine control system in Ust-Ilimsk.
How it is built
The headbox delivers the suspension to the forming section, where the web is formed and most of the water removed; the press section squeezes it between rolls; the dryer section — dozens of steam cylinders — brings the moisture to the target; the calender smooths the surface; the reel winds the roll. Modern machines run at up to 1,500–2,000 m/min with web widths up to 10 metres.
Drives and automation
Each section has its own motor with a variable-frequency drive; the drive control system sets the speed “rule” with increasing draw between sections and holds web tension during acceleration, breaks and grade changes. The machine control system includes basis weight and moisture control from scanning sensors, steam control of the dryer section, vacuum and stock supply control, and soft starters for large motors.
Where it appears on this site
The Ilim project: control system and drives of the board machine in Ust-Ilimsk; Knauf Petroboard: automation of the mill CHP boiler; solutions for the pulp and paper industry — paper machine control systems, sectional drives, soft starters, steam turbines for mill CHP plants, boiler control systems; participation in the PulpFor exhibition.
Questions and answers
What is a BDM?
BDM is the Russian abbreviation for a paper machine; for board the term KDM, board machine, is used. It is a line up to 200 metres long that forms, dewaters, presses, dries and reels a web of paper or board from a water suspension of fibre.
Why does a paper machine need sectional drives?
Each section — wire, presses, dryer cylinders, calender, reel — is turned by its own motor, and the section speeds must be coordinated with high precision so that the web neither breaks nor sags. The drive control system sets the speed “rule” and holds tension during acceleration, breaks and grade changes.
Which paper machine projects has the company delivered?
The control system and drives of the board machine at the Ilim Group mill in Ust-Ilimsk and the automation of the Knauf Petroboard CHP boiler. See the Ilim project and solutions for the pulp and paper industry.
Related terms
Updated: 2026-09-23