What is cogeneration (CHP)

Cogeneration is the combined production of electricity and heat in one plant: the heat of the exhaust gases and the cooling systems of the engine or turbine, which would otherwise be lost, heats water or produces steam. A CHP plant (mini-CHP) is a captive generation complex based on gas engine gensets, microturbines or gas turbines; the overall fuel utilisation reaches 85–90 %.

Key facts

  • Power and heat are produced in one unit from one fuel.
  • Overall fuel utilisation reaches 85–90 %.
  • Mini-CHP plants use gas engines, microturbines or gas turbines.
  • Pays off with stable simultaneous demand for power and heat.
  • Trigeneration adds cooling through absorption chillers.

How it works

The prime mover drives the generator while its heat flows are collected in heat exchangers: for a gas engine genset the cooling jacket, the oil and the exhaust at about 400–500 °C; for a gas turbine or microturbine the 300–600 °C exhaust, from which a heat recovery boiler produces steam or hot water. The electrical efficiency of a genset is more than 41 % and the overall efficiency in cogeneration up to 87 %; microturbines produce up to 7.7 t/h of steam.

What a CHP plant consists of

Several power modules in containers or a building, gas conditioning, heat recovery boilers and heat exchangers, switchgear with grid synchronisation, the plant control system and, where needed, peak hot-water boilers and heat storage. Packaged supply shortens erection and lets capacity grow with the load.

When it pays

With simultaneous and stable demand for electricity and heat: industrial plants, greenhouse complexes, residential districts, oilfields with associated gas. The economics depend on the gas price and grid tariff, the annual hours of heat use and the distance to consumers; trigeneration adds cooling through absorption chillers and improves summer utilisation.

How it differs from a large CHP station and a boiler house

A boiler house gives only heat; a condensing power station gives only electricity and loses the heat in the cooling tower. A large CHP station uses back-pressure or extraction steam turbines; a mini-CHP does the same job at plant scale with 900–2,000 kW gas engine gensets or 110–1,966 kW microturbines without long heat networks.

Questions and answers

How does a mini-CHP plant differ from a boiler house?

A boiler house produces only heat, while a mini-CHP plant produces power and heat together: engine or turbine heat that would otherwise escape heats water or raises steam. Its overall fuel utilisation therefore reaches 85–90 %, and the plant covers part or all of its own electricity demand.

When does a mini-CHP plant pay off?

When power and heat demand are stable and coincide in time, gas is available at a reasonable price and the grid tariff or connection cost is high. The economics are assessed from the load profile, annual hours of heat use and maintenance cost; the input data is collected in a questionnaire.

What is trigeneration?

The production of power, heat and cooling in one plant: in summer part of the heat drives an absorption chiller for air conditioning or process cooling. This keeps the plant loaded in the warm season, when little heat is needed.

Related terms

Updated: 2026-09-23

CallSend a request