What is a gas engine genset
A gas engine genset is a gas-fuelled reciprocating internal combustion engine with a generator on the same shaft plus cooling, lubrication and control systems. It produces electricity with an electrical efficiency of more than 41 % and, with recovery of the cooling and exhaust heat, up to 87 % overall.
Key facts
- A gas reciprocating engine and a 1,500 rpm generator on a common baseplate.
- Electrical efficiency over 41 %, up to 87 % with cogeneration.
- Unit output from hundreds of kilowatts to several megawatts.
- Maintenance by engine hours; the interval to major overhaul is set by the manufacturer.
- Fuels: natural, associated, bio-, landfill and industrial gas.
How it is built
An in-line or V-type lean-burn spark-ignition engine with turbocharging and intercooling; a 1,500 rpm synchronous generator on a common baseplate; jacket and mixture cooling circuits, a lube oil system, gas conditioning and a pressure regulator, a control cabinet with synchronisation and protection. The heat of the jacket, oil and exhaust is recovered in heat exchangers and a heat recovery boiler.
Fuel
Natural gas, associated petroleum gas, biogas, landfill and industrial gas. The lean-burn engine tolerates changes of gas composition within set limits; associated gas and biogas are conditioned — dried, cleaned of hydrogen sulphide and pressure-stabilised.
Where it is used
Oil and gas fields, industrial plants, CHP plants and captive power complexes, sites with expensive or unreliable grid supply. Several units run in parallel and are switched in by load, which gives redundancy and fuel savings at part load.
How it differs from a gas turbine
A gas engine genset has a higher electrical efficiency and handles part load better, but needs more frequent maintenance (oil and spark plug changes, cylinder overhauls) and gives low-grade heat. A gas turbine wins at large unit sizes, where steam is needed and on liquid fuel. A detailed comparison is in the article “Gas turbine or gas engine genset”.
Questions and answers
What output do gas engine gensets have?
Industrial gas engine gensets range from hundreds of kilowatts to several megawatts per unit. For higher output several units run in parallel, which gives redundancy and fuel savings at part load.
How often is a gas engine genset maintained?
By engine hours: oil, filters and spark plugs are changed regularly, valves and ignition are checked, and the cylinder and piston group is overhauled to schedule. The interval to major overhaul is set by the manufacturer. A genset needs maintenance more often than a gas turbine but wins on electrical efficiency.
Related terms
Updated: 2026-09-23