What is a high-voltage test laboratory
A test laboratory is a unit with certified personnel and test equipment registered with Rostechnadzor that performs acceptance and in-service tests and measurements in electrical installations. A mobile high-voltage test laboratory travels to the substation with resonant test systems and tests equipment up to 750 kV on the erection site.
Key facts
- Performs acceptance and in-service tests of electrical equipment.
- Registered with Rostechnadzor; the certificate lists test types and voltage classes.
- A mobile laboratory travels to the substation with resonant test sets.
- Test voltage up to 750 kV.
- The result is a test report and a statement of readiness for energisation.
What it does
High-voltage tests of GIS, SF6 circuit breakers, disconnectors and earthing switches, current and voltage transformers and SF6 bus ducts after erection and repair; partial discharge measurement during the voltage hold; insulation and main-circuit resistance measurement; breaker characteristic checks. The result is a test report and a statement of readiness for energisation.
Equipment
Two mobile resonant AC test systems, WRV 3.6/680 M and WRV 1.5/680 G, rated for test voltages up to 750 kV. They are supplied from the site network and, thanks to resonance with the capacitance of the test object, need tens of times less power than a conventional test transformer. The kit includes partial discharge detectors, voltage dividers, leak detectors and breaker test instruments.
Registration and permits
The electrical test laboratory is registered with Rostechnadzor (certificate No. 9834 of 20 December 2024) with the right to perform acceptance tests and measurements of electrical equipment and installations up to 750 kV. The staff hold electrical safety qualifications and are certified in the test procedures; work is carried out under permits-to-work.
Where it appears on this site
Tests of the 400 kV GIS and SF6 bus ducts at the Akkuyu NPP (letters of appreciation from Akkuyu Nuclear), high-voltage equipment service for grid companies, nuclear power and industry; call-outs to substations in Russia and the countries of presence.
Questions and answers
Why must a test laboratory be registered with Rostechnadzor?
Acceptance test results for commissioning electrical installations are accepted from a registered laboratory. Registration confirms certified staff, calibrated test equipment and approved procedures; the certificate lists the permitted test types and voltage classes.
Up to what voltage does the Energy Management laboratory test?
Up to 750 kV. The laboratory is registered with Rostechnadzor (certificate No. 9834 of 20 December 2024) and uses two mobile resonant test systems, WRV 3.6/680 M and WRV 1.5/680 G, supplied from the site network.
What does an on-site GIS test include?
A power-frequency withstand test with partial discharge measurement, checks of current and voltage transformers, main-circuit resistance and breaker characteristics. The result is a report and a statement of readiness for energisation — see GIS testing.
Related terms
Updated: 2026-09-23