What is an aeroderivative gas turbine

An aeroderivative gas turbine is an industrial gas turbine derived from an aircraft engine: a light gas generator with a high pressure ratio and a free power turbine. It starts in minutes, has a high simple-cycle efficiency, allows modular replacement of the gas generator and copes well with variable loads; it is inferior to heavy-duty machines in unit size and hot-section life.

Key facts

  • The gas generator is based on an aircraft engine, followed by a free power turbine.
  • Start and loading within 5–10 minutes.
  • The gas generator is exchanged for a spare within days.
  • Typical output range: 20–60 MW.
  • More efficient than heavy-duty machines in simple cycle.

How it is built

The gas generator is the compressor, combustor and compressor turbine of an aircraft engine adapted to gas fuel and ground operation; behind it is a free power turbine, not mechanically linked to the gas generator, that drives a generator or a compressor. Light casings and rolling-element bearings allow the whole gas generator to be removed and exchanged for a spare within days.

Where it is used

Peaking and standby power plants where a 5–10 minute start matters; mechanical drive of compressors on gas pipelines and at LNG plants; offshore platforms and ships where weight and size count; distributed generation of 20–60 MW.

How it differs from heavy-duty gas turbines

Heavy-duty industrial machines (for example the 185 and 308 MW class) have massive casings, journal bearings, a lower pressure ratio and larger unit size; they are designed for base load and long maintenance intervals, and repairs are done on site. Aeroderivatives are lighter, more efficient in simple cycle and faster to start, but more sensitive to fuel quality and maintained by module exchange.

Service

Inspections by operating hours and on request within the scope of the operating manual, borescope inspection of the hot section, vibration diagnostics and balancing, support and upgrade of control systems with transfer of the algorithms, spare parts by model and serial number. On this site: service of Rolls-Royce aeroderivative gas turbines.

Questions and answers

How does an aeroderivative turbine differ from an aircraft engine?

The gas generator is adapted to ground operation on gas or liquid fuel: the combustor and fuel system are modified, and instead of producing thrust the exhaust energy is used in a free power turbine that drives a generator or compressor. The light casings and rolling-element bearings are kept.

Where are aeroderivative gas turbines used?

At peaking and standby power plants where a 5–10 minute start matters; for compressor drive on gas pipelines and at LNG plants; on offshore platforms and ships where weight and size count; in distributed generation of 20–60 MW.

How are aeroderivative turbines maintained?

Through inspections by operating hours, borescope checks of the hot section and module exchange: the whole gas generator is removed and replaced with a spare, and repairs are done in a service centre.

Related terms

Updated: 2026-09-23

CallSend a request