What is control system migration to a Russian platform
Control system migration is the step-by-step replacement of the hardware and software platform of an operating control system with another platform while keeping the protection and control algorithms, sensors and actuators. It is applied when the old platform is no longer supported or does not meet requirements: for example, transferring Siemens Energy SPPA-T3000 and SIMATIC PCS 7 systems to the Russian Ezan platform.
Key facts
- The platform is replaced while algorithms, sensors and actuators are kept.
- Four steps: survey, development, bench, commissioning.
- The new system is verified on a bench and a digital model before site work.
- Switchover during planned outages, with possible parallel operation.
- Target platform: the Russian Ezan platform.
Sequence of work
Survey: inventory of controllers, channels, application software and screens, assessment of the field level. Development: transfer of the algorithms to the new platform without changing the logic, design of cabinets and network, screens and historian. Bench tests: the new system is verified on the company’s own bench and on a digital model of the equipment before going to site. Commissioning: step-by-step changeover during planned outages, parallel operation of old and new systems, integrated trials.
What is transferred
Protection and control algorithms, start and shutdown sequences, setpoints and interlocks; the I/O channel configuration with the existing sensors and actuators; operator screens with logic familiar to the staff; archives and reports. Separate subsystems — anti-surge controllers, vibration monitoring — are transferred or integrated.
Risks and how they are reduced
Errors in transferred algorithms — bench tests and the model; production downtime — changeover during planned outages and parallel operation; loss of support for the old system before migration is complete — support of the existing SPPA-T3000 and PCS 7 by the same team; information security requirements — coordination with security tools on the bench.
Where it appears on this site
Support of operating Siemens Energy SPPA-T3000 and SIMATIC PCS 7 systems and their step-by-step replacement with the Russian Ezan platform on Katren and Sonet controllers; four steps — survey, development, bench, commissioning; an example of PCS 7 work — Knauf Petroboard.
Questions and answers
Why move from SPPA-T3000 and PCS 7 to a Russian platform?
Support and spare parts for imported platforms are limited in Russia, and since 1 January 2025 foreign software may not be used at significant critical infrastructure objects under Presidential Decree No. 166. Moving to a Russian platform keeps the algorithms and field equipment and removes dependence on an unavailable supplier.
Can migration be done without stopping production?
The switchover is done during planned outages, and before that the new system is fully verified on a bench and a digital model of the equipment. Old and new systems can run in parallel during the transition, so unplanned downtime is avoided.
What is kept during migration?
Protection and control algorithms, start and shutdown sequences, setpoints and interlocks, sensors and actuators, operator screens with familiar logic, archives and reports. Controllers, cabinets, network and system software are replaced — see migration from SPPA-T3000 and PCS 7.
Related terms
Updated: 2026-09-23