What is industrial cybersecurity

Industrial cybersecurity is the protection of process control systems from cyber attacks, errors and unauthorised access: security assessment, segmentation of the control network, firewalls, remote access control, security tools compatible with the control platform. Requirements are set by FSTEC of Russia and Federal Law 187-FZ for critical infrastructure; the work is carried out under a licence for technical protection of confidential information.

Key facts

  • The priority is availability and integrity of control, not confidentiality.
  • The basis is segmentation of the control network and remote access control.
  • Security tools are tested for platform compatibility on a bench.
  • Requirements are set by FSTEC of Russia and 187-FZ.
  • Work is done under an FSTEC licence for technical information protection.

How it differs from IT security

In control systems the priority is availability and integrity of control, not confidentiality: a turbine controller cannot be rebooted for an update, nor an operator command blocked. Controllers and protocols often have no built-in security, updates are possible only in planned outages, and security tools must be checked for compatibility with the platform before deployment.

What is done

Security assessment: inventory of systems and control systems, vulnerability search, threat and intruder model. Network security: segmentation of the control network into zones, firewalls and unidirectional gateways at the boundary with the corporate network, control of contractors’ remote access. Deployment of security tools: anti-virus, integrity control, event logging, intrusion detection. Support of platform upgrades with information security requirements in mind.

Bench and licence

Information security tools for control platforms are tested on the company’s own bench before deployment at the plant — this rules out conflicts with the application software and any effect on the cycle time. The work is carried out under the FSTEC of Russia licence for technical protection of confidential information.

Where it appears on this site

Industrial cybersecurity, categorisation of critical infrastructure under 187-FZ, the HyperSphere fault-tolerant cluster for control system servers, migration to the Russian platform with security requirements in mind; partnership with the Kaspersky cybersecurity hackathon.

Questions and answers

How does control system security differ from office network security?

What matters most in a control system is continuity and integrity of control: a turbine controller cannot be rebooted for an update and an operator command cannot be blocked. Security tools are therefore checked for platform compatibility in advance, updates are installed in planned outages and the network is divided into zones with controlled exchange between them.

Which FSTEC requirements apply to control systems?

For significant CII objects, FSTEC of Russia Order No. 239 of 25 December 2017; for control systems at critical and potentially hazardous facilities, Order No. 31 of 14 March 2014. The set of measures depends on the object’s significance category or the system’s security class.

What is a unidirectional gateway?

A device that physically lets data pass in one direction only — from the control network to the corporate network. Operating data reach business systems, while there is no return path for an attack on the controllers. Gateways are installed at the control network boundary together with firewalls.

Related terms

Updated: 2026-09-23

CallSend a request